Bk-precision 5492BGPIB - Manual Manual do Utilizador Página 55
- Página / 111
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Remote Operation
55
5.1.2 RS-232 Serial Interface
Perform the following steps to select the USB and RS-232 interface for remote communication:
1. Press → to enter the menu on the menu level, “A: MEAS MENU” will be displayed.
2. Use or key to move across to the I/O MENU on the menu level, “E: I/O MENU” will be
displayed.
3. Press to move down to the command level within the I/O MENU, “1: GPIB ADDR” will be
displayed.
4. Use or key to move across to the INTERFACE command, “2: INTERFACE” will be
displayed.
5. Press to move down a level to select an interface.
6. Use or key to select “USB.RS232” option as the interface.
7. Press (ENTER) to confirm the selection. The message “CHANGE SAVED” will be displayed
to show that the change is now in effect.
8. Press → key to exit from the menu.
5.1.3 GPIB Interface (model 5492BGPIB only)
Note: GPIB interface is only available on model 5492BGPIB.
Perform the following steps to select the GPIB interface for remote communication:
1. Press → to enter the menu on the menu level, “A: MEAS MENU” will be displayed.
2. Use or key to move across to the I/O MENU on the menu level, “E: I/O MENU” will be
displayed.
3. Press to move down to the command level within the I/O MENU, “1: GPIB ADDR” will be
displayed.
4. Use or key to move across to the INTERFACE command, “2: INTERFACE” will be
displayed.
5. Press to move down a level to select an interface.
6. Use or key to select “GPIB” option as the interface.
7. Press (ENTER) to confirm the selection. The message “CHANGE SAVED” will be displayed
to show that the change is now in effect.
8. Press → key to exit from the menu.
- 5 ½ Bench Digital Multimeter 1
- Safety Notice 2
- Safety Summary 2
- Compliance Statements 4
- CE Declaration of Conformity 5
- Table of Contents 6
- 1.1 Feature Overview 9
- General information 10
- 1.3 Package Contents 11
- Chapter 2 Overview 12
- Overview 13
- 2.2 Screen Display 14
- 2.5 Rear Panel Summary 17
- 2.6 Power up 18
- 2.6.2 Power-up Sequence 18
- 2.6.4 Power-on Defaults 19
- 2.6.5 Warm-up time 21
- 3.1 Overview 22
- 3.2 Measuring Voltage 22
- 3.2.1 Connections 22
- DC Voltage 23
- 3.2.2 Crest factor 24
- 3.3 Measuring Current 24
- 3.3.1 Connections 24
- Digit Multimeter 25
- 3.4.1 Connections 26
- Basic Measurements 27
- 3.5.2 Gate Time 28
- 3.5.3 Connections 28
- 3.7 Testing Diode 30
- 3.7.1 Connections 30
- 3.7.2 Current Range 31
- 3.8 Math Functions 32
- 3.8.1 mX+b 32
- 3.8.2 Percent 33
- 3.8.3 dB Calculation 34
- 3.8.4 dBm Calculation 35
- 4.1.1 Range 37
- 4.1.2 Filter 38
- 4.1.3 Relative 39
- 4.1.4 Rate 40
- 4.2 Trigger Operations 41
- 4.2.1 Trigger Model 41
- Measurement Options 42
- 4.3 Buffer Operations 44
- 4.3.1 Store Reading 45
- 1.234 m:005 46
- 4.3.3 Buffer Statistics 47
- 4.4 Limit Operations 47
- 4.4.1 Enabling limits 48
- 4.5 System Operations 49
- 4.5.1 Beeper Control 50
- 4.5.2 Save Settings 50
- 4.5.3 Restore Settings 51
- 4.5.4 Display Control 51
- 4.5.5 Key Sound 52
- 4.5.6 Self-test 52
- 4.5.7 Calibration 53
- 5.2.1 RS-232 Connection 56
- 5.2.3 Selecting Baud Rate 57
- 5.2.6 Selecting Echoing 58
- 5.2.7 Software Protocol 59
- 5.3.1 GPIB Connection 60
- 5.3.3 GPIB Addressing 61
- 5.4 Data Format 61
- 6.1 Command Structure 62
- 6.2 Command Syntax 63
- 6.2.2 Short-form Rules 64
- 6.2.5 Command Path Rules 65
- 6.3 Command Reference 66
- SCPI Command Reference 67
- MEASure command 67
- CONFigure Command 68
- FETCh Command 69
- READ Command 69
- 6.3.2 DISPlay subsystem 70
- 6.3.3 CALCulate Subsystem 70
- :CALCulate[1] Subsystem 72
- :CALCulate2 Subsystem 74
- :CALCulate3 Subsystem 77
- :[SENSe[1]] Subsystem 83
- NPLCycles Command 84
- RANGe Command 85
- AVERage Command 88
- THReshold Command 90
- DIODe Command 91
- CONTinuity Command 91
- 6.3.5 SYSTem Subsystem 92
- 6.3.6 UNIT Subsystem 94
- 6.3.7 TRIGger Subsystem 97
- 6.3.8 Common Commands 99
- Troubleshooting Guide 100
- Front Panel Operation 100
- Remote Operation 100
- 7.2 Error Messages 101
- Chapter 8 Specifications 102
- DC CHARACTERISTICS 103
- TRUE RMS AC CHARACTERISTICS 104
- Specifications 105
- Remote Interface 109
- General Specifications 109
- SERVICE INFORMATION 110
- LIMITED THREE-YEAR WARRANTY 110
Manuais e produtos relacionados com Ferramentas Bk-precision 5492BGPIB - Manual
(4 páginas)
(91 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais